 |
Alki Lumber and Hardware |
 |
FOUNDED 1921 |
 |
 |
 |
 |
Plywood |
 |
 |
||
 |
Plywood
 | CDX exterior Ply |
| ACX exterior Ply |
| Sturdi Floor |
| HDO |
| MDO |
CDX - Unsanded panel specially designed for
structural subfloor decking, wall and roof applications. Can also be used
for shipping crates, pallets and pallet bins, shelving, partitions, and
other construction and industrial applications.
C Tight knots to 37.5 mm (1-1/2 in.). Knotholes to 25 mm (1 in.)
across grain and some to 37.5 mm (1-1/2 in.). Synthetic or wood repairs.
Discoloration and sanding defects that do not impair strength permitted.
Limited splits allowed, stitching permitted. C-grade veneer minimum
permitted for Exterior panels.
D Knots and knotholes to 62.5 mm (2-1/2 in.) width across grain and 12.5 mm (1/2 in.) larger within specific limits. Limited splits permitted. Stitching permitted. Use of D-grade veneer limited to Exposure 1 panels.
| SIZES 8mm (5/16 in.) 9.5mm (3/8 in.) 12mm (15/32 in.) 12.5mm (1/2 in.) 15mm (19/32 in.) 16mm (5/8 in.) 18mm (23/32 in.) 19mm (1/4 in.) |
| Treated/ground contact |
| Fire Rated (Dricon) |
| some 4X10 stock, call for availability. |
ACX For exterior applications where appearance
of only one sanded side is important; underface of roof overhangs, fences,
railcar and lorry linings, farm buildings, tanks, trays, commercial
refrigerators, etc.
A Smooth, sanded, paintable surface. Up to 18 neatly made
repairs permitted, all must be parallel to the grain. May be used for
natural finish (clear sealer type) in less demanding applications.
Synthetic repairs permitted.
C Tight knots to 37.5 mm (1-1/2 in.). Knotholes to 25 mm (1 in.) across grain and some to 37.5 mm (1-1/2 in.). Synthetic or wood repairs. Discoloration and sanding defects that do not impair strength permitted. Limited splits allowed, stitching permitted. C-grade veneer minimum permitted for Exterior panels.
| Sizes 6.5mm (1/4 in.) 8.5mm (11/32 in.) 9.5mm (3/8 in.) 12mm (15/32 in.) 12.5mm (1/2 in.) 15mm (19/32 in.) 16mm (5/8 in.) 18mm (23/32 in.) 19mm (3/4 in.) |
| Fire Rated (Dricon) |
| some 4X10 stock, call for availability. |
"Sturdi Floor" Rated Single Layer Floor
Specially designed floor panel with a smooth surface for carpet and pad, with height impact and concentrated load resistance. Available with square or tongue-and-groove edges. Commonly touch-sanded.
| Sizes 15mm (19/32 in.) 16mm (5/8 in.) 18mm (23/32 in.) 19mm (3/4 in.) 28.5mm (1-1/8 in.) |
High Density Overlay (HDO)
Panel face and back covered with hard, semi-opaque resin-fibre overlay (phenolic
film faced); highly resistant to abrasion. For concrete forms, cabinets,
countertops, signs and industrial tanks. Also available with
skid-resistant screen-grid surface.
| Sizes 2X8 9.5mm (3/8 in.) 12.5mm (1/2 in.) 15mm (19/32 in.) 16mm (5/8 in.) |
| Call for availability. |
Medium Density Overlay (MDO)
One or both surfaces covered with smooth,
opaque resin-fibre overlay; ideal base for paint, indoors or outdoors. For
shelving, factory work surfaces, panelling, signs, built-in storage units.
Specially manufactured MDO panels may also be used for concrete forming.
Also available as an APA 303 Sliding.
| Sizes 8.5mm (11/32 in.) 9.5mm (3/8 in.) 12mm (15/32 in.) 12.5mm (1/2 in.) 15mm (19/32 in.) 16mm (5/8 in.) 18mm (23/32 in.) 19mm (3/4 in.) |
For more information we recommend visiting http://www.apawood.org/